We work for you for 27 years!
Real estate holding
+7(495) 665-7777 (multiline)
Planning Model Series
Monolithic House (Tower) with 1,2, and 1,2,3 bedroom apartment. Two variants of apartments on the floor razmesheniya
floors - 24 floors. Height of dwellings - 2,70 m. The technical solutions and technical floor for the placement of utilities, a non-residential floor.
Elevators - two passenger and two cargo-carrying capacity of 400 and 630 kg.
Building Design - Exterior walls are monolithic thickness 320 mm. Internal monolithic 200 mm. Partitions plasterboard 80 mm thick. Covering monolithic thickness of 140 mm.
Heating - central water. Ventilation - natural extract through the ventilation units in sankabine. Water - hot and cold water from the city network. Garbage chute - garbage chute with boot pockets on each floor.
House Series P-111M - a large-panel house with 1,2,3,4-pet apartments with improved design.
Height accommodation: 2,64 m. External walls of the house 350 mm thick made of high-aggregate concrete sandwich panels with an inner layer of insulation - EPS 8 cm thick, which corresponds to the thermal characteristics of the brick wall thickness of 90 cm
Two elevators : passenger capacity of 400 kg and cargo - 630 kg. Natural ventilation via exhaust ventbloki in the bathroom and the kitchen. Automatic smoke extraction from floor-corridor and head of air in the stairwell and elevator shafts. Additional evacuation ladders. Cold and hot water from the city network. Electrical - lighting facilities and use of electrical appliances from 220V, for lifts and electric-380V. Network radio, collective antennas, security system and the entrance to the house, fire alarm.
panel houses a series PD-4consist of a block-sections with 1, 2, 3, 4 and 5-room apartments with improved design. Ceiling height - 2,75 m.
The apartments have a utility room.
Balconies - large, with the original form. Houses in this series are 12, 14 or 16-storey. 1st floor non-residential.
Two elevators: passenger - and cargo carrying capacity 400kg - 630kg capacity. Sandwich panel exterior walls, finding one another like tiles, have a thickness of 300mm. This design does not require additional sealing and attractive appearance. The inner walls of reinforced concrete, the thickness of 140 and 180mm. Partitions - 100mm. Ceilings - reinforced concrete, thickness of 140mm. Natural ventilation via exhaust ventbloki in bathrooms and kitchen. At 3, 4 and 5-room flats, two bathrooms.
Dye house Series PD4 after installation, mainly in light-beige tones.
House Series P-3M consist of straight and corner sections, each of which contains four flats . Houses Series P-ZM varied in appearance. Houses Series P-3M built from 7 to 17 floors.
Exterior walls - sandwich panel thickness of 350 mm, internal - reinforced concrete, the thickness of 140 mm and 180 mm, walls - 80 mm, floor - reinforced concrete. Two elevators: passenger capacity of 400 kg and passenger capacity of 630 kg. Natural ventilation through ventbloki in the bathroom and kitchen. Garbage chute with boot flaps on each floor.
Houses Series P-3M - modern, comfortable, with bay windows in 3 and 4 bedrooms. apartments. The 4-bedroom. apartments, two bathrooms.
Perhaps the union of apartments, located on the floor, in blocks.
System Prism includes ordinary End, corner, turning the block section, allowing a dense structure of the building. The block sections are developed using the "wide step, the transverse walls 7,2 m, an additional step 3,6 m and a height of 3,3 m.
floor area of apartments above the existing regulations in Moscow, which provides for their commercial realization. In planning decisions apartments achieved increased living conveniences apply flexible planning methods, including the association of space with sliding partitions. The buildings have mansard, which is the second level maisonettes. Under all the block sections below tehpodpolya can be placed parking of personal vehicles.
Planning solution - frame and brick house with a multisection 1, 2, 3, 4 and 5 (duplex) room apartments and increased comfort with the increase of area apartments. Floors - 5-7-9 floors. The height of dwellings -2,7 m Technical rooms - tehpodpole and attic accommodation of utilities. Lifts - passenger capacity of 400 kg and 630 kg of cargo.
Building construction - exterior walls - brick-thick 630 mm. Domestic - bearing 140 concrete and 180 mm. Ceilings - reinforced concrete thickness of 220 mm. Heating - central water. Ventilation - natural extract a venti-blocks in sankabine and in the kitchen. Water - hot and cold water from the city network. Musoroudalenie - garbage chute with boot flaps on each floor.
Bekeron - stone house with the increase of area apartments. In the house - 1, 2, 3, 4-room apartments.
Floors - 4 to 7 floors. Internal walls - reinforced concrete, the thickness of 140 mm, walls - 80 mm. Ceilings - reinforced concrete, hollow core panels. Natural ventilation via exhaust ventbloki in the bathroom wilt kitchen. In 5-7-storey houses passenger lift capacity of 630 kg.
Exterior walls - lightweight aggregate panel thickness of 400 and 500 mm.
JSC "Construction Management ¹ 155" was to erect a new series of large-panel houses. The construction of a new series of individual prefabricated houses and 155 allows some of the same products on the same design scheme to collect house different configurations, different heights, with different types of apartments. Each individual house has a "face": all his set of flats and different layout, number of floors from 12 to 24 floors, boma "tower" type or multi-sectional.
The main elements of the series I-155 is the internal load-bearing walls and exterior load-bearing sandwich panel of length 7.2 m. Heat engineering and architectural aspects of design houses a series of I-155 meet the modern requirements.
The walls are layered, the thickness of the exterior curtain walls - 320-400 mm and 440-540 mm butt. In homes, the tower "type 1 st to 8th floor exterior walls are made of reinforced concrete. Domestic inter-apartment wall - bearing, reinforced concrete without insulation, the thickness of 200 mm. Penetration of additional openings shall be permitted only in agreement with the relevant authorities, individually. The roof is covered with insulated slab, which is filled with modern waterproofing polymeric materials.
Depending on the layout of the apartments have bay windows. Balconies and loggias glazed. The windows are installed in the windows clean wooden frames. In the windows from the inside to install special energy-saving glass.
These homes installed an upgraded heating system with thermostat in each apartment, batteries, hot-air type. Ventilation ducts located in the kitchen. Perhaps the union of flats in blocks.
The panel block houses a series of P-55 is 1, 2, 3 and 4 bedroom apartments . Various options for the location of apartments in the sections.
House 12-14 floors, ceiling height - 2.64 m. Two passenger elevators with carrying capacity 400 kg. Increased noise protective exterior provides lightweight aggregate wall thickness of 340 mm. Internal walls - thick concrete 140 and 180 mm. Partitions - 80mm. Ceilings - reinforced concrete thickness of 140 mm. Natural ventilation via exhaust ventbloki in the bathroom and the kitchen.
Series P-30 / P-55M
Panel building a series of P-55M with 1, 2, 3, 4 room apartment has various options location in the sections.
Houses can be 12, 14 and 16-storey. Ceiling height - 2.64 m. Two passenger elevators with carrying capacity 400 kg. Exterior walls - sandwich panel thickness of 340 mm, with increased sound insulation. Domestic - reinforced concrete, the thickness of 140 and 180 mm. Partition - 80 mm, concrete floors, thickness 140 mm. Natural ventilation through ventbloki in the bathroom and the hallway.
House Series P-46M consists of prefabricated blocks, sections 1, 2, 3 and 4 Holiday apartment and can be 4, 5, 7, 9 and 14 storey.
Elevator in a 4-storey sections of the passenger carrying capacity 400 kg in the 5-9 storey sections of the carrying capacity of 630 kg in the 14 storey sections - capacity 400 kg and 630 kg. Exterior walls - lightweight aggregate thickness of 340 mm. Domestic - reinforced concrete thickness of 140 mm or 180 mm. Partition - 80 mm. Ceilings of reinforced concrete, the thickness of 140 mm. Rooms in all apartments are isolated. Kitchens - from 8.6 sq.m to 12 sq.m. Size hallways - from 8 meters to 12.7 meters The 4-room apartment on 2 bathrooms.
House Series P-44 - panel, consists of rows and angular chetyrehkvartirnyh sections with 1-but , 2-D and 3-room apartment. Floors: 17 floors.
Exterior walls: sandwich panels, the thickness of 300 mm. Interior walls: reinforced concrete, the thickness of 140 and 180 mm. Partition - 80 mm. Ceilings - reinforced concrete, thickness of 140 mm.
Two elevators: passenger, load capacity 400 kg, load capacity 630 kg.
Ventilation: natural exhaust through the ventilation units in the bathroom and the kitchen.
Heating: Central heating, water.
Water supply: cold and hot water from the city network.
Musoroudalenie: garbage disposal with a boot valves on each floor.
Height of dwellings: 2,64 m.
Panel building a series of U-44T consists of sections with 1 -, 2 - and 3-room apartments.
Exterior walls consist of sandwich panels with a thickness of 300 mm covered with decorative brick. The design of the usual three-layer panels (concrete, insulation - concrete), but by improving insulation (layer of special film) increased insulation home. Internal walls - thick concrete 140 and 180 mm floors - reinforced concrete 140mm. The ventilation unit taken out of the kitchen.
At each entrance are 2 lifts, passenger capacity of 400 kg and a cargo capacity of 630 kg. The windows are equipped with heat-shielding glass packages with high insulation values.
House P-44T series are composed of straight lines and angular sections.
In the straight section on each floor there are 4 apartments: one bedroom apartment, one bedroom apartment and two bedroom apartments (with an arrangement of rooms and a kitchen on one side of the house and location of rooms on different sides ('vest'). Privates sections differ from each other presence or absence of edges, Condominium layout of apartments with different locations of bay windows. The relative placement of apartments on the floor in all types of straight sections equally.
Corner sections are located 4 apartments: two one-bedroom and two three-bedroom apartments. In contrast to the straight sections the relative positions of apartments on the floor in the corner section has several options, two of which are shown in the figures. Just like straight sections, corner sections can be butt-ends (right or left) and configured apartments with different locations of bay windows.
In the case of location on the first floor electrical control box with a passage, in the entrance is not numbered, one-bedroom apartment. Entrance, where the switchboard is located, has an entrance from both sides.
Panel building a series of P-44M consists of rows and end chetyrehkvartirnyh sections 1, 2, 3 and 4-room apartment. In the two-and three bedroom apartments have bay windows.
Exterior and interior walls, partitions are on technology, similar technology when building houses a series of P-44T.
The windows in the same way as in the homes of a series of P-44T, equipped with heat-shielding double-glazed windows with high insulation values. The apartments have a dark room, an area of up to 3 m, and in three-and four-room apartment with two bathrooms.
Above the top floor built on the attic, qualitatively changed their appearance at home.
House KOPE series consist of the layout of space-planning elements (KOPE), which can be attached to each friend, and so home can have a different configuration and length.
Number of floors can be 12,16,18 and 22. Two elevators: passenger - carrying capacity of 400kg and the passenger - carrying capacity of 630 kg, external walls have a configuration of sandwich panels 300mm thick. Along the edges of the front panels of speakers are small hanging balconies. Internal walls - thick concrete 140 mm or 222 mm. Partition walls - thick concrete 140 mm. Ventilation - natural extract through ventbloki in the bathroom and kitchen.
On the basis of model apartments, new 4 and 6 bedroom apartments. By optimizing the size of outbuildings significantly increased kitchen area (19.5 sq.m). Changed the location of the ventilation units in the kitchen. In the modernized 4 and 6 bedroom apartments and 2 balconies.
The main characteristics of houses with modernized series KOPE 4 and 6 rooms. flats similar to those of buildings with different types of apartments.
Residential building with bearing internal walls of concrete panels with a minimum thickness of 180 mm. The exterior walls, sandwich -520 mm, are performed in a complex brickwork with effective insulation.
The house with two lifts - utility and cargo.
Garbage chute with boot flaps on each floor.
Apartments with bay windows and balconies. Ceiling height 2,68 m.
One-bedroom apartments with the area - 41,99 sq.m.
Two bedroom apartment - 62.99 sq.m. *; * 66.10 sq.m.; 68.26 sq.m.; 72.28 sq.m.
Two-bedroom apartment - 85.89 sq.m., 87.12 sq.m.
Ventilation - the kitchen and sankabine.
*- Two and three-room apartments - with two bathrooms.